You have taken over a kitchen, changed the menu or added a new grill, and the exhaust is no longer keeping up. The first question is whether you need a new system or whether the one you have can be changed. Often the answer is somewhere in between: keep the parts that are sound and change the one that is holding the rest back.
Treat it as three parts, not one
A kitchen exhaust is a hood, a duct and a fan. Each can be in good or poor condition, and each can be the right or wrong size for what you cook now. Deciding part by part usually saves money and time, because a sound duct hidden above a ceiling is the most disruptive part to replace.
| Part | Modify when | Replace when |
|---|---|---|
| Hood | It is sound but too short for the line, or needs to move | It is corroded, badly dented or the wrong type for the cooking |
| Duct | It is sound but the route needs to change or lacks access panels | Joints leak, it is badly corroded or it is far too small |
| Fan | It is the right size but worn: belt, bearing or wheel | It is too small for the kitchen now, or the housing has failed |
Modifications that often solve the problem
- Extending the hood over a new piece of equipment at the end of the line
- Moving the hood with the cooking line instead of building a new one
- Re-routing a duct to remove a dip where grease pools or a run of sharp bends
- Adding access panels so the duct can finally be cleaned end to end
- Upgrading the fan once the hood and duct are right
- Fixing a fresh air shortage that makes a good hood look bad
When replacing is the better answer
If a hood is rusted through, or has been patched so many times that grease leaks from the seams, an extension only joins new metal to a failing part. The same goes for a duct with leaking joints along its length. And if the menu has moved from light cooking to charcoal or wok, the hood may be the wrong type altogether, not just the wrong size. In those cases a new part is the cheaper choice over a few years.
Clean it before you decide
A heavily greased system can look worse and perform worse than it is. Clogged filters, a coated fan wheel and a choked duct all cut airflow. A full exhaust system cleaning sometimes brings a system back to working well, and it shows the real condition of the metal underneath.
HoodEx carries out kitchen exhaust modification and full kitchen hood installation across the UAE. We look at all three parts at the site visit and tell you which to keep and which to change. Your landlord or building may have rules for changes to the exhaust; tell us at the site visit.
Frequently asked questions
Is modifying a kitchen exhaust cheaper than replacing it?
Usually, because the parts in good condition stay. But extending a failing hood or duct is money spent twice, so condition matters as much as cost.
Can a hood be extended without removing it?
Often, yes, if the hood is sound and there is room at the end. The extension is joined and sealed to the existing hood.
Our new menu has more grilling. Do we need a new hood?
Not always. It depends on the hood type, its size and the fan. Heavier cooking may need a longer hood, a stronger fan or both.
Related reading
A Dubai checklist for choosing a kitchen hood cleaning company: what a proper job covers, what to ask, red flags, mall and night-shift rules, and how to compare quotes.
How to choose a kitchen hood and exhaust installation company in Dubai: the site visit, what to ask, mall and tower rules, red flags and how to compare quotes.
The main commercial kitchen exhaust hood types, where each one fits, what it is good at and what to think about before you choose one for a restaurant or cloud kitchen.
Related services
Need your exhaust system cleaned?
HoodEx cleans the full system — hood, filters, duct, fan and ESP unit — across the UAE. See our services or the areas we serve.
Book a Cleaning