A kitchen exhaust system can look like a simple metal box on the wall with a pipe running out of it. Behind that box are four linked decisions: how the smoke is caught, how it is carried, what pulls it and where it is let out. Get one wrong and the rest of the system cannot rescue it. This guide walks through each one in the order a designer thinks about them.
1. Capture: catching the smoke where it starts
Everything begins at the cooking line. Hot air from a grill or fryer rises in a plume that spreads as it climbs. The hood has to be wide and deep enough to sit over that plume, and close enough that the plume has not spread past its edges. The hotter and smokier the cooking, the bigger the plume, which is why a charcoal grill needs a far stronger setup than a pasta boiler.
The hood also has to pull enough air through its opening to hold the plume inside. Too little, and smoke spills out at the front. Draughts matter here: an air conditioning outlet blowing across the line or a door that opens beside it can push smoke out of a hood that would otherwise work.
2. Filtration: stopping grease at the hood
Before the air leaves the hood it passes through grease filters, usually baffle filters in commercial kitchens. They knock out the heavier grease droplets and send them to a trough. What gets past them settles in the duct and fan, which is why those parts need cleaning too.
3. Duct: carrying the air out
The duct is sized so the air inside it keeps moving briskly. If the duct is too large, the air slows down, grease drops out and coats the inside. If it is too small, the air races, the system gets noisy and the fan has to work much harder. The route matters as much as the size: every bend and every extra length adds resistance. Horizontal runs should fall back toward the hood so grease drains instead of pooling.
4. Fan: providing the pull
Only now is the fan chosen. The designer adds up the air the hood needs and the resistance of the filters, duct and any ecology unit, and picks a fan that can move that much air against that resistance. A fan picked first, because it was cheap or already on site, is how many kitchens end up with a hood that looks right and does not work.
5. Discharge: where the air goes
The last decision is the outlet. It should send the exhaust away from windows, fresh air intakes and places people sit, so smoke and smell are not pulled back in or blown onto neighbours. In a mall or tower the building usually decides where kitchen exhaust may discharge. Where the outlet is close to people, the building may ask for an ESP or ecology unit to clean the air first.
And the air that comes back in
One part is easy to forget: the air the exhaust removes has to be replaced. Our guide to make-up air explains why a kitchen short of fresh air will defeat even a well-sized hood and fan.
- Capture: hood type and size set by the cooking under it
- Filtration: grease filters in the hood
- Duct: sized to keep the air moving, routed short and draining
- Fan: chosen last, for the air and resistance the rest adds up to
- Discharge: placed away from people and air intakes
NFPA 96 is the standard most commercial kitchens follow for hoods and grease ducts, and your landlord, building or local authority may add requirements of their own. HoodEx plans these parts together for kitchen exhaust installation in the UAE, starting with kitchen hood installation and working back to the fan.
Frequently asked questions
What are the main parts of a kitchen exhaust system?
The hood with its grease filters, the duct, the exhaust fan and the outlet. Some systems also have an ESP or ecology unit.
Why is the fan chosen last?
Because the fan has to suit the air the hood needs and the resistance of everything after it. Those are only known once the hood and duct are planned.
Can a stronger fan fix a hood that does not capture?
Sometimes a little, but often not. If the hood is too small or in the wrong place, more fan power mainly pulls more air from the room.
Related reading
A plain guide to kitchen exhaust duct cleaning in Dubai: why grease builds up inside the duct, how often to clean it, what a proper job covers and what to ask before you book.
Kitchen extract cleaning, extraction cleaning, exhaust cleaning: what the different names mean, which parts of the system are included and how to compare quotes in the UAE.
How kitchen exhaust cleaning works for mall and food court outlets in Dubai: shared ducts, ecology units, night shifts, mall permits and what outlet managers should prepare.
Related services
Need your exhaust system cleaned?
HoodEx cleans the full system — hood, filters, duct, fan and ESP unit — across the UAE. See our services or the areas we serve.
Book a Cleaning